Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with






See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in San Diego?
Spring replacement in San Diego typically costs between $210 and $400 for a standard torsion spring repair, parts and labor included. Most single-spring replacements on a typical two-car garage door land right around $275 to $340. If both springs need replacing at the same time, which is common because the two springs wear at roughly the same rate, expect to pay between $340 and $550 total.
That’s the honest range. We’ve been repairing garage doors in San Diego under the Kingswell standard since 2001, and those numbers reflect what we actually see across neighborhoods like Clairemont, Rancho Bernardo, and Chula Vista. The good news: a spring replacement is almost always a same-day fix, and a reputable shop will hand you a written price before any work starts.
If your garage door won’t open and the spring has snapped, call (619) 374-2463 for a free estimate. A live person answers, day or night. For a deeper look at how the full repair process works, see our guide to Spring Replacement in San Diego.
Spring Replacement Cost Breakdown (2026)
Here’s what a spring replacement job looks like line by line in the San Diego market. These are real ranges we quote from, not national averages pulled from a database.
| Line Item | Typical Cost | Notes |
|---|---|---|
| Torsion spring (single) | $90 – $160 | Price varies by wire gauge, spring length, and cycle rating |
| Second spring (if replaced together) | $70 – $140 | Often discounted when done in the same visit |
| Labor | $120 – $240 | Includes balancing the door and adjusting cable tension |
| Standard job total (one spring) | $210 – $400 | Most common range for a two-car residential door |
| Both springs replaced | $340 – $550 | Recommended when springs are the same age |
| Emergency / after-hours service | $40 – $90 surcharge | Varies by time of night and distance in San Diego County |
What drives the final number? A few things. The cycle rating of the spring matters a lot: a 10,000-cycle spring costs $15 to $30 more than a standard 5,000-cycle spring but lasts roughly twice as long. The door weight also plays in. A heavy custom wood door in Coronado needs a beefier spring than a standard insulated steel door in Scripps Ranch. And where you live in the county affects the service call math: most San Diego companies, including Bramwell, don’t charge a trip fee within our service area, but outlying spots near Alpine or Valley Center may carry a modest travel charge.
One more local factor: salt air. If you’re within a few miles of the coast, in Point Loma or Imperial Beach, your springs corrode faster. We regularly see rust-pitted springs fail at 5 to 7 years on coastal homes, versus 8 to 12 years inland in neighborhoods like Poway or Santee. That corrosion can make removal slightly more involved, which is why some coastal jobs land at the upper end of the labor range.
What Affects Spring Replacement Pricing in San Diego
Six factors move the price up or down on a San Diego spring replacement. We’ll walk through each one so you know what to expect before you call.
- Single spring vs. dual spring. Most two-car doors in San Diego have two torsion springs. You can replace just one, but if both are original and aging, you’ll likely be back for the second within a year. Replacing both at once adds $140 to $250 to the bill, which is usually cheaper than two separate visits.
- Spring cycle rating. A standard torsion spring is rated for about 5,000 open/close cycles, which translates to 6 to 8 years of typical use. A 10,000-cycle spring, sometimes called a long-life spring, runs $15 to $30 more per spring. For a garage door you use four or more times a day, it’s worth the upgrade.
- Door weight and size. A 16-foot double garage door needs springs with more lifting force than a 8-foot single door. Heavier doors, like solid wood carriage-house models you see in Mission Hills, require upgraded springs that cost $20 to $50 more than standard coils.
- Coastal corrosion vs. inland wear. In La Jolla, Ocean Beach, and Del Mar, salt in the air accelerates rust on springs and mounting hardware. Rusted fasteners can slow the job down, and the spring itself may need a corrosion-resistant coating. This is one reason coastal spring replacement jobs sometimes come in $20 to $50 above the inland baseline.
- Time of day and day of week. Standard service hours, Monday through Saturday, carry no surcharge. Evening jobs, Sundays, and holidays typically add $40 to $90 in San Diego. We answer the phone 24/7, so you’ll always know the number before a truck rolls.
- Bearing and cable condition. Sometimes the spring didn’t fail alone. Worn end bearing plates or frayed lift cables are discovered during the job. Replacing a bearing plate adds $30 to $60; a cable runs $155 to $295 per the ranges on our service pages. A technician following the Kingswell standard will always show you the written price for extra work before touching it.
How to Save on Spring Replacement
Spring replacement isn’t a place to cut corners, but there are a few legitimate ways to keep the final bill reasonable without sacrificing the repair.
- Replace both springs at the same time. It sounds counterintuitive when you’re trying to save, but doing both in one visit means one trip charge, one service call, and usually a small per-unit discount. Replacing one spring now and its twin later costs more in the long run, even if the immediate out-of-pocket is lower.
- Ask about cycle-rated springs before you buy. If you plan to be in your home more than five years, a 10,000-cycle spring costs about $20 more per spring but roughly doubles the lifespan. Over a decade, you’ll likely avoid one entire replacement visit.
- Book during regular daytime hours. Evenings and weekends are convenient, but they carry a surcharge in the San Diego market. If your door can wait until morning, you’ll save the after-hours fee.
- Get the price in writing before work starts. This is the big one. A door-to-door quote that changes after the tech “finds something” is the most common way San Diego homeowners overpay. At Bramwell, the price you hear before we open the toolbox is the price on the invoice, period. Call (619) 374-2463 for a free estimate and we’ll tell you the range over the phone.
- Look for the guarantee. A repair that fails in six months isn’t a savings, it’s a second bill. We back every job with the 365-Day Done Right Promise: if the repair fails within a year, we come back and fix it at no charge. That’s not a verbal promise, it’s in writing on every invoice.
One thing we never suggest: installing the cheapest spring available. A bargain spring rated for 5,000 cycles on a door that sees heavy daily use will fail sooner, and you’ll pay for labor all over again. The honest value is a quality spring with a written guarantee on the labor.
FAQs – Spring Replacement Cost
How much does it cost to replace a garage door spring in San Diego?
A single torsion spring replacement in San Diego costs $210 to $400, parts and labor included. Replacing both springs at once runs $340 to $550. These are 2026 market prices from our own service data across the city and county.
Is it cheaper to repair or replace a garage door spring?
Repair is almost always cheaper. A spring replacement costs $210 to $400, while a full new door installation in San Diego runs $825 to $2,595. Unless your door panels or tracks are badly damaged, replacing the spring is the right financial call. Call (619) 374-2463 and we’ll tell you over the phone which route makes sense for your door.
Can a San Diego technician replace my spring the same day?
Yes. Most spring replacements are completed in a single visit, usually within an hour or two of arrival. Bramwell stocks common torsion spring sizes for the doors we see most in San Diego, from standard builders-grade doors in Otay Ranch to heavier custom doors in Point Loma. If yours is an uncommon size, we can typically source it same day from our local parts suppliers.
How long do garage door springs last in San Diego?
Inland, a standard torsion spring lasts 8 to 12 years. Coastal homes, within a few miles of the ocean, often see springs fail at 5 to 7 years due to salt corrosion. A 10,000-cycle upgraded spring can extend that by 50 to 70% depending on how often the door cycles.
Why did my garage door spring break?
The most common cause is metal fatigue: every open and close cycle bends the coil slightly, and after 5,000 to 10,000 cycles the metal simply gives out. In San Diego, coastal moisture accelerates the process if the spring is uncoated or the garage is poorly ventilated. A sudden snap is loud and sounds like a firecracker, but the spring itself fails gradually over years at the molecular level.
Does the warranty cover the spring and the labor?
At Bramwell, yes. The spring carries a manufacturer’s cycle rating, and our labor is covered by the 365-Day Done Right Promise. If a covered spring or repair fails inside one year, we return and correct it at no charge, in writing, on every job. Ask the technician to show you exactly what the written guarantee covers before you sign off. Call (619) 374-2463 for an exact quote on your door, free.
Free Estimates & Same-Day Spring Replacement in San Diego
If your spring has snapped and the door is stuck, you don’t have to figure this out alone. Bramwell Garage Doors San Diego operates under the Kingswell standard since 2001, which means four things on every job, without exception: a written price before work starts, a real arrival window we actually hit, a clean job site when we leave, and a written guarantee on the repair. Marcus Ellery leads our San Diego team, and every technician who shows up at your door is background-checked and in uniform.
The 365-Day Done Right Promise is simple: if it’s not done right, we make it right. If a covered repair fails inside the guarantee period, we come back and fix it at no charge. That’s the kind of guarantee a San Diego homeowner should expect when they’re paying $210 to $400 for a spring replacement.
Call (619) 374-2463 now. A live person answers 24 hours a day, including weekends and holidays. We’ll give you a free estimate over the phone and a real arrival window so you know exactly when we’ll be there. You can also browse our full list of garage door services to see everything we handle across San Diego County.
Pricing reflects the San Diego market as of 2026. Bramwell Garage Doors San Diego offers free estimates – call (619) 374-2463.
Written by Marcus Ellery, Owner at Bramwell Garage Doors San Diego, serving San Diego under the Kingswell standard since 2001.
What Our Customers Say
"Spring snapped on a Sunday and the door was stuck half open with my car trapped inside. Called Bramwell and they had someone out that afternoon. Price he quoted on the phone was the price I paid, no games. Door runs quieter now than it has in years."
- Mike R."These guys actually show up when they say. I've had other companies give me a four hour window and still miss it. Bramwell gave me a time and the van was in my driveway ten minutes early."
- Carlos M."Our opener finally died after 15 years. The tech walked me through two options with the prices written down before he touched anything, and didn't push the expensive one. New one's been perfect."
- Danielle P.